How Wide Should a Pool Mosaic Border Be?
Most pool waterline borders are about 6 inches tall, because that band covers the line where the water rises and falls. But the right width for a patterned border is the one that makes the pattern land cleanly at every corner. We choose the width and the pattern together, never one after the other.
Start from the waterline
The water level in a pool is held near the middle of the skimmer opening, and it moves up and down with weather, swimmers and evaporation. The waterline band covers that range, so the edge where tile meets plaster never sits at the surface. A band of about 6 inches does that on most pools. Our grid waterline designs are made 6.3 or 7 inches wide for the same reason.
A wider band, 8 inches or more, works when the border is the main feature of the pool, or when the pool is large and the border is seen from across the yard.
Why the width decides the corners
A border has to come back to where it started. Every corner, step and curve interrupts the pattern, and the repeat has to divide into each run between them without a visible cut.
Change the width and the repeat changes with it. On an entry floor we drew this year, a 6-inch band left the six runs between corners 34 percent apart in how the pattern fell. Narrowing the band to 5 inches brought that to 6 percent, and the pattern met cleanly at each corner. A corner block also has to work in whole modules of the pattern, so a small change in width can decide whether the corners line up.
This is why we ask for the pool plan before we fix the width, not after.
Match the pattern to the width
A wider band gives a pattern room to breathe. A narrower band suits a simpler pattern.
Greek key or meander. It needs enough width for its turns to read from the deck. On a narrow band, use fewer turns.
Hand-cut scroll or acanthus. It needs height for its leaves and spirals. On a recent 6-inch scroll border, one repeat ran about 30 inches.
Secondary line. A thin line, an inch or two wide, can sit beneath a heavier border or separate two fields. It is not a border on its own.
If a design has more detail than the band can hold, we widen the band or simplify the drawing so it still reads from the deck.
Steps, spas and floors
Steps and benches. The leading edge of each step usually gets a narrow contrasting band so it can be seen underwater. Check your local code for public and commercial pools.
Spas. A spa border usually matches the pool’s waterline band so the two read as one design.
Entry floors. Borders around a medallion or a marble rug are often 4 to 6 inches, set by the room’s walls and the same corner rule.
What we need to size your border
The pool plan with dimensions, or the floor plan for an interior border
Where the border goes: waterline, steps, spa, floor
A pattern you like, or a reference number from our borders page
We draw the border to your corners and send the drawing for approval before anything is cut. Glass borders arrive paper-faced and marble borders mesh-backed, in numbered sections keyed to the layout, ready for your tile setter.
More: our 60+ mosaic border designs, how a Greek-style pool carries its key border, and what a custom pool mosaic costs.
Begin your commission
Send the details of your project, or call (323) 389-5347. Studio hours are Monday to Saturday, 8am to 3pm Pacific.